Mon compte | Mon panier | 0 objet(s) dans le panier   Français English Espanol
Fabricants
Newsletter :
4011TL
Cliquer pour agrandir

4011TL

Marque : DPA

4011TL Imprimer la page 4011TL  
Destination(s) : Studio

Application(s) : Basson - Batterie - Caisse Claire - Clarinette et haubois - Cymbales - Flute & Piccolo - Guitare - Guitare acoustique - Harmonica - Overheads - Perc. classiques - Percussions globales - Piano - Saxophone - Toms - Trombone - Trompette - Tuba - Chant - Voix

Directivité : Cardioïde

Type : Condensateur
En savoir plus :
  • DPA
  • The 4011-TL cardioid microphone is a new upgraded version of the classic DPA 4011 renowned in recording studios all over the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion.

    The first order cardioid pick-up pattern gives superb separation between sound sources while spot-miking on every kind of live music. The mic is equally suitable for close-up work on acoustic guitar, grand piano, overheads, percussion, wind instruments and vocals. It can handle incredibly high sound levels and even includes a 20 dB pad switch to attenuate the output of the microphone.

    A flat on axis frequency response and excellent phase response deliver a totally faithful reproduction of the original sound. The off-axis response is similarly smooth so that any leakage is an accurate reflection of the original, though attenuated according to the true first-order cardioid pick-up. The feeling of being there will always be more intense with the 4011-TL than with any other cardioid.

         audio sample : women voice

         audio sample : man voice

    Specifications :

    Principle of operation:
    Pressure gradient
    Cartridge type:
    19 mm (0.75 in) pre-polarised condenser
    Power supply:
    48 V Phantom power
    Frequency range, ± 2 dB:
    40 Hz - 20 kHz
    Directional characteristics:
    Cardioid
    Equivalent noise level A-weighted:
    Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))
    Sensitivity, nominal, ±2 dB:
    10 mV/Pa; -40 dB re. 1 V/Pa
    Equiv. noise level ITU-R BS.468-4:
    Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
    Capsule diameter:
    19 mm (0.75)
    Total harmonic distortion (THD):
    <0.5% up to 110 dB SPL peak
    <1% up to 116 dB SPL peak
    Preamplifier frequency range:
    20 Hz to 40 kHz -3 dB (loaded with 2x10 kOhm// 10 nF - equivalent to 100 m cable)
    Output impedance:
    <200 Ohm
    Cable drive capability:
    Up to 100 m (328 ft)
    Microphone length:
    175 mm (6.89 in)
    Max. SPL, peak before clipping:
    158 dB
    Weight:
    165 g (5.82 oz)
    Dynamic Range:
    Typ. 97 dB
    Switchable attenuator:
    0 dB, -20 dB
    S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
    75 dB(A)
    Connector:
    3-pin XLR-M (Standard P48)
    Current consumption:
    2.60 mA