Mon compte | Mon panier | 0 objet(s) dans le panier   Français English Espanol
Fabricants
Newsletter :
4026
Cliquer pour agrandir

4026

Marque : DPA

4026 Imprimer la page 4026  
Destination(s) : Sonorisation - Studio

Application(s) : Cravate - Cuivres - Perc. classiques - Percussions globales - Piano - Chant - Voix

Directivité : Cardioïde

Type : Condensateur
En savoir plus :
  • DPA
  • The DPA 4026 is a phantom powered (P48) compact condenser microphone using the same type of cartridge as the 4015 wide cardioid microphone, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier.

    The 4026 has its cable (3 m as standard) rear-mounted, for situations where the microphone needs to be suspended from its own cable or mounted on a stand.

    The linear frequency response together with the nice and subtle high frequency lift give that brilliant sparkle of purity, which will bring your sound to a higher level. The ultra-small design makes Type 4026 the perfect choice whenever high definition audio and insignificant size is paramount. With unbelievable depth and precision, the DPA Compact wide cardioids will exceed your expectations on choirs, percussion, grand pianos, reed and brass instruments and much more.

    Spécifications :

    Principle of operation:
    Pressure gradient
    Cartridge type:
    19 mm (0.75 in) pre-polarised condenser
    Power supply:
    48 V Phantom power
    Frequency range, ± 2 dB:
    On-axis: 40 Hz to 20 kHz
    Directional characteristics:
    Wide Cardioid
    Equivalent noise level A-weighted:
    Typ. 20 dB(A) re. 20 µPa
    Sensitivity, nominal, ±2 dB:
    7 mV/Pa; -43 dB re. 1 V/Pa
    Equiv. noise level ITU-R BS.468-4:
    Typ. 25 dB (max. 28 dB)
    Capsule diameter:
    19 mm
    Total harmonic distortion (THD):
    <0.5 % THD up to 110 dB SPL peak
    1% THD up to 116 dB SPL peak
    Output impedance:
    <300 Ohm
    Cable drive capability:
    Up to 100 m (328 ft) after XLR connector
    Microphone length:
    35 mm; 52 mm incl. cable relief
    Max. SPL, peak before clipping:
    145 dB SPL peak
    Weight:
    30 g (without cable)
    Operating temperature range:
    -10 to +55 °C (+14 to 131 °F)
    Cable length:
    3 m
    Dynamic Range:
    Typ. 96 dB
    S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
    74 dB(A)
    Connector:
    3-pin XLR-M (Standard P48)
    Current consumption:
    2.60 mA