Click to enlarge

4065FL

Manufacturer: DPA

Item price: 568.00 € [ Payez en 6x sans frais ]

Ecotaxe non incluse - Catégorie 4.6 [info] : + 0.10 €

Délai : Under 5/6 days

Destination(s) : Sound Reinforcement - Studio

Application(s) : Voices

Directivité : Omnidirectional

Type : Condenser

DPA

Quel microphone choisir ? Le micro de scéne

The DPA 4065-FL is the beige version of the headband mounted condenser microphone DPA 4065. This type uses a prepolarised omnidirectional cartridge element with a 5.4 mm vertical diaphragm, which is acoustically identical with the cartridge used in DPA 4061. It is specially designed for maximum performance under the often difficult conditions when mounted directly on the human body. The band is easily bent to fit any head shape, in a tight fixed position.

Special attention has been paid in the design to the humidity problems that often occur in theatrical applications and to the light weight construction of the headband itself. A double vent protection system, a drop stopper on the tube together with water resistant materials inside the microphone, make it more than difficult for the humidity to cause the Headband Microphone to fail. The sensitivity is 6 mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters.

If powered correctly the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs. A wide range of connection adapters makes it possible to use the headband with close to any professional wireless system available plus 48 V phantom.

DPA 4065 is excellent for on-stage use as well as in the studio.

Specifications :

Principle of operation:
Pressure
Cartridge type:
Pre-polarised condenser element with vertical diaphragm
Power supply:
Min 5 V - max 50 V through DPA adapter
Frequency range, ± 2 dB:
20 Hz-20 kHz, 3 dB soft boost at 8-20 kHz
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equiv. noise level ITU-R BS.468-4:
Typ. 38 dB (max. 40 dB)
Total harmonic distortion (THD):
<1% THD up to 123 dB SPL peak
Preamplifier frequency range:
20 Hz to 50 kHz (+0d B/-3 dB)
Output impedance:
30-40 Ohm
Cable drive capability:
Up to 300 m (984 ft)
Microphone length:
12.7 mm (0.5 in)
Max. SPL, peak before clipping:
144 dB
Weight:
14 g (0.49 oz) incl. cable and MicroDot connector
Cable length:
1.8 m (5.9 ft)
Cable colour:
Beige
Colour:
Beige
Dynamic Range:
Typ. 97 dB
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
68 dB (A)
Connector:
MicroDot
Sensitivity, nominal, ±3 dB:
6 mV/Pa; -44.5 dB re. 1 V/Pa