Français English Espanol
www.sud-claviers.com
In your cart: 15 item(s)
 
Since 1982
 
blueberry

MORE
  Top » AEA
R84
Click to enlarge

R84

Manufacturer: AEA

Item price: 1,075.00 €  [ Payez en 6x sans frais ]
Ecotaxe non incluse - Catégorie 4.6 [info] : + 0.10 €
Délai : Livré sous 21 jours
R84 Imprimer la page R84 Simulez le financement de votre projet
Destination(s) : Studio

Application(s) : Acoustic guitar - Ethnic Percussion - Viola

Directivité : Figure 8

Type : Ribbon
More:
  • AEA (Audio Engineering Associates)
  • Studio Ribbon Microphone

    The AEA R84 is an affordable Large Ribbon Geometry (LRG) microphone suitable for use by the most demanding audio professional or hobbyist.

    If you are new to ribbons, you are in for a treat! Experienced users have discovered the R84 is an outstanding general-purpose microphone, ideally suited for solo and accent work. It is hard to find an application where this mic does not shine. It is a fine example of the natural sound and figure-8 directional sensitivity a quality ribbon mic delivers.

    • Pure natural sound, just as you hear it when you're placing your mic in the studio.

    • Quick smooth transients that capture the feeling of being there without sounding like a recording.

    • Extended bass and treble that captures the details without shoving anything in your face.

    • A figure-eight pattern that focuses your recording on the sound you want.

    We believe you will enjoy the confidence this mic inspires. It's a forgiving tool that makes your recording work easier, as it literally sounds good on everything. Try it first and you'll usually like it and find it sits well in the mix. When time is scarce and quality necessary, put the R84 to the test. Our users' experience is that you'll use it more and more (in pairs too!). Then it will start to really grow on you.

    Specifications:

    Operating Principle: Velocity microphone

    • Frequency Response: 20 Hz to above 20 kHz

    • Maximum SPL: 165 + dB SPL above 1 kHz for 1% third harmonic

    • Output Sensitivity: -52 dBv/Pa

    • Output Impedance: 270 ohms nominal

    • Recommended Load: 1.2 K ohm or greater

    • Powering: Not required or recommended

    • Polarity: Pin 2 high for positive pressure on front of microphone.

    • Connector: XLR-3M wired to a 3 meter captive cable

    Off Axis Response:

    • Polar Pattern: Native bi-directional pattern

    • Horizontal: Level changes with angle, frequency response is consistent, –35 dB null at 90 / 270 degrees

    • Vertical: Level changes with angle, reduced HF response above and below 0 / 180 degree axis, null at 90 / 270 degrees

    Transducer element

    • Ribbon Thickness: 1.8 microns ( .0000018 meter ) of pure aluminum

    • Ribbon Width: 4.7 mm

    • Ribbon Length: 59.7 mm