|
The AT2022 is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the AT2022 provides the spatial impact and realism of a live sound field. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and .5 m cable that terminates in a 3.5 mm stereo plug.
- X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
- Provides the spatial impact and realism of a live sound field
- Battery operation allows use with most recording devices
- Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
- User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
- Ideal for general stereo recording and field sound capture
- Excellent channel separation
- Included fuzzy windscreen offers excellent wind protection
| SPECIFICATIONS |
| ELEMENTS |
Fixed-charge back plate, permanently polarized condenser |
| POLAR PATTERN |
X/Y Stereo |
| FREQUENCY RESPONSE |
20–20,000 Hz |
| LOW FREQUENCY ROLL-OFF |
150 Hz, 6 dB/octave |
| OPEN CIRCUIT SENSITIVITY |
-41 dB (8.9 mV) re 1V at 1 Pa |
| CHANNEL BALANCE |
<2.5 dB |
| IMPEDANCE |
200 ohms |
| MAXIMUM INPUT SOUND LEVEL |
122 dB SPL, 1 kHz at 1% T.H.D. |
| DYNAMIC RANGE (typical) |
103 dB, 1 kHz at Max SPL |
| SIGNAL-TO-NOISE RATIO |
75 dB, 1 kHz at 1 Pa |
| BATTERY TYPE |
1.5V AA/UM3
WARNING: The AT2022 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result. |
| BATTERY CURRENT / LIFE |
1.2 mA / 500 hours typical (alkaline) |
| SWITCH |
Off, on/flat, on/roll-off |
| WEIGHT |
270 g (9.5 oz) |
| DIMENSIONS |
192.0 mm (7.56") long,
65.0 mm (2.56") maximum head diameter,
21.0 mm (0.83") body diameter |
| OUTPUT CONNECTOR |
Integral 3-pin XLRM-type |
| CABLE |
0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end |
| ACCESSORIES FURNISHED |
AT8405a stand clamp for 5/8"-27 threaded stands; fuzzy windscreen; battery; soft protective pouch |
| SPECIFICATION GRAPHS |
| Click on the chart to view the larger image |
|
|
POLAR PATTERN
1 kHz in 90-degree position
|
|
|
POLAR PATTERN
8 kHz in 90-degree position
|
|
|
POLAR PATTERN
200 kHz in 90-degree position
|
|
|
FREQUENCY RESPONSE |
|
|
|
