Mon compte | Mon panier | 0 objet(s) dans le panier   Français English Espanol
Fabricants
Newsletter :
BP896cLM3
Cliquer pour agrandir

BP896cLM3

Marque : Audio-Technica

Imprimer la page BP896cLM3  
Destination(s) : Installation - Sonorisation

Application(s) : Chant - Voix - Conférence - Présentateur

Directivité : Omnidirectionnel

Type : Electret
En savoir plus :
  • Audio-Technica
  • Available in December  

    Subminiature Omnidirectional Condenser Lavalier Microphone  

    With a capsule diameter not much bigger than the head of a pin, Audio-Technica’s smallest-ever lavalier microphone virtually disappears in props or clothing to create highest-quality audio for broadcast and theater sound reinforcement.

    The BP896 MicroPoint™ omnidirectional lavalier delivers extremely intelligible natural audio and handles high sound pressure levels with ease. Its subminiature omni element is enclosed in a durable housing designed to minimize noise from handling, clothing and wind. Flip a switch to eliminate low-frequency hum without affecting intelligibility.

    Offered in wired & wireless models, the BP896 comes generously equipped with an extensive accessory kit—mic holders, windscreens, element covers & more.
    • Inconspicuous, lightweight capsule
    • Extremely intelligible natural audio
    • Handles high sound pressure levels with ease
    • Rugged built for long-lasting performance
    • High-pass UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
    • Requires 11V to 52V DC phantom power
    • Includes generous accessory kit & protective case
    • RoHS compliant—free from all substances specified in the EU directive on hazardous substances
    • Available in black and beige, wired and wireless models:
      • BP896 – includes AT8539 power module
      • BP896-TH – same as BP896, but in “theater” color (beige)
      • BP896c – less power module; 1.4 m (55”) cable, unterminated
      • BP896c-TH – same as BP896c, but in “theater” color (beige)
      • BP896cW – less power module; 1.4 m (55”) cable terminated with locking 4-pin connector for A-T UniPak® wireless systems
      • BP896cW-TH – same as BP896cW, but in “theater” color (beige)
      • BP896cL4 – less power module; 1.4 m (55”) cable terminated for Sennheiser wireless systems using Lemo connector
      • BP896cL4-TH – same as BP896cL4, but in “theater” color (beige)
      • BP896cLM3 – less power module; 1.4 m (55”) cable terminated for Sennheiser wireless systems using locking 3.5 mm connector
      • BP896cLM3-TH – same as BP896cLM3, but in “theater” color (beige)
      • BP896cT4 – less power module; 1.4 m (55”) cable terminated with TA4F-type connector for Shure wireless systems
      • BP896cT4-TH – same as BP896cT4, but in “theater” color (beige)
      • BP896cT5 – less power module; 1.4 m (55”) cable terminated with TA5F-type connector for Lectrosonics wireless systems
      • BP896cT5-TH – same as BP896cT5, but in “theater” color (beige)
    Specifications :

    ELEMENT Fixed-charge back plate, permanently polarized condenser
    POLAR PATTERN Omnidirectional
    FREQUENCY RESPONSE 20-20,000 Hz
    LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave (wired only)
    OPEN CIRCUIT SENSITIVITY –49 dB (3.5 mV) re 1V at 1 Pa
    IMPEDANCE 250 ohms (wired only)
    MAXIMUM INPUT SOUND LEVEL 135 dB SPL, 1 kHz at 3% T.H.D.
    DYNAMIC RANGE (typical) 104 dB, 1 kHz at Max SPL (wired only)
    SIGNAL-TO-NOISE RATIO 63 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical (wired only)
    SWITCH Flat, roll-off (wired only)
    CURRENT CONSUMPTION 0.1 mA typical at 5V (wireless only)
    VOLTAGE RANGE 2.5-11V (wireless only)
    WEIGHT (MICROPHONE) 0.14 g (0.005 oz)
    WEIGHT (POWER MODULE) 85 g (3.0 oz)
    (wired only)
    DIMENSIONS (MICROPHONE) 10.8 mm (0.43") long,
    2.6 mm (0.10") diameter
    DIMENSIONS (POWER MODULE) 97.6 mm (3.84") long,
    18.9 mm (0.74") diameter
    (wired only)
    OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
    CABLE 1.4 m (55") long (permanently attached to microphone), 1.6 mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
    ACCESSORIES FURNISHED BP896: AT8539 power module (wired only); two AT8157 windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 black single mic holders; 2 black double mic holders; belt clip (wired only); carrying case
    BP896-TH: AT8539 power module (wired only); two AT8157-TH windscreens; six element covers (2 white, 2 beige, 2 black); viper clip base; clothing clip base; 3 beige single mic holders; 2 beige double mic holders; belt clip (wired only); carrying case
    AUDIO-TECHNICA CASE STYLE M39