Click to enlarge

CCM4VLG

Manufacturer: Schoeps

Item price: 2,270.00 € [ Payez en 6x sans frais ]

Ecotaxe non incluse - Catégorie 4.6 [info] : + 0.10 €

Délai : Under 5/6 days

» voir les produits associés

Destination(s) : Studio

Application(s) : Clarinet and oboe - Enregistrement d'ambiance - Acoustic guitar - Classics Perc. - Violin - Viola

Directivité : Cardioid

Type : Condenser

Schoeps

Microphone Capsule MK 4V, Compact Microphone CCM 4V

cardioid for lateral pickup
for universal application
slight high-frequency emphasis

The MK 4V and CCM 4V were created in answer to requests for a cardioid microphone whose main axis is along the side of the capsule. In addition to its usefulness in the concert hall, this microphone type is of particular value in speech recording, since its slight emphasis around 10 kHz helps to improve intelligibility.

The directional response is especially well maintained even at higher frequencies, due to the acoustically transparent housing. High-frequency emphasis of off-axis sound – typical of most small axial-response cardioids – occurs less with the MK 4V/ CCM 4V, but because of its inherent frequency response, it still sounds somewhat brighter overall than the MK 4 or CCM 4.

For speech applications, SCHOEPS offers the pop filter PR 120 SV.

The MK 4V may be easier to use in near-coincident setups than the MK 4: the microphone bodies do not get in each other's way. With the MK 4 this can be avoided using GVC “elbows” or Colette cables.

Note:
Though not specifically designed for such use, the MK 4V capsule can also be used on the RC Active Tube or the variable angle joint GVC; when fully tightened it will rarely be aimed where you intend. On request we will supply an elastic ring which can be slipped over the threads of the RC or GVC so that the final turn of the capsule will place it at the desired angle of rotation.

Technical specifications

Frequency range:	40 Hz - 20 kHz
Sensitivity:	13 mV/Pa
Equivalent noise level:	A-weighted: 14 dB-A
Equivalent noise level:	CCIR: 24 dB
Signal-to-noise ratio (A-weighted):	80 dB-A
Maximum SPL (0.5% THD):	132 dB

Surface finish : matte gray (g) or nickel (ni)

Avec ce produit nous vous proposons :


	SA2 Adapter for Saxophone SA 2 for...	287.00 €