Click to enlarge

UMT 800

Manufacturer: Microtech-Gefell

Item price: 2,330.00 € [ Payez en 6x sans frais ]

Ecotaxe non incluse - Catégorie 4.6 [info] : + 0.10 €

Délai : Livré sous 21 jours

Destination(s) : Studio

Application(s) : Accordion - Clarinet and oboe - Meeting - Contrabass - Cuivres - Cymbales - Enregistrement d'ambiance - Acoustic guitar - Hi-Hat - Classics Perc. - Ethnic Percussion - Percussions - Minor percussions - Piano - Sax - Vintage sound - Transmission - Trumpet

Directivité : Multi-directivity

Type : Condenser

Microtech-Gefell

The UMT 800 is a large format studio microphone featuring a pickup capsule with a long history of proven performance. Five polar patterns make this mike an ideal choice for a wide range of professional and semi-professional recording situations.

The UMT 800 produces a clean, colorless sound, ideally suited for accurate recording of instrumental and vocal soloists in music studios, motion picture scoring stages and television broadcast studios. Two distinguishing characteristics of this microphone are its high sensitivity and outstanding signal to noise ratio.

The pickup capsule is a pressure gradient transducer using dual membranes and a single brass back plate. The large diameter plastic membranes are sputtered with gold. Varying the polarization voltage to the membranes with the pattern switch, located just below the head grill, produces five patterns: omni, wide cardioid, cardioid, hyper-cardioid and figure 8.

The direction of maximum sensitivity is radial to the head grill, i.e. side addressed.

The microphone amplifier is a transformerless design with a symmetrical output stage. This design yields a wide dynamic range and a low self noise floor. The sensitivity can be reduced by a 10 dB switch mounted on the body of the mike when miking extremely loud sound sources. A low frequency roll-off switch, also mounted on the body of the mike, reduces proximity effect when close miking.

The microphone is equipped with a 3 - pin XLR connector fitting to a microphone cable, e.g. C 70. The UMT 800 uses 48 volt phantom powering according to the international standards DIN 45596 and IEC 268 -15. It is available in a black matte or satin nickel finish.

Specifications

Polar patterns		omni, wide cardioid, cardioid, hypercardioid, fig-8
Acoustical operating principle		Pressure gradient transducer
Frequency range		40 . . . 18000 Hz
Switch position "reduced bass roll-off" at 90 Hz		-10 dB
Sensitivity		8 /cardioid 13 mV/Pa
Rated impedance		150
Equivalent loudness level due to inherent noise	CCIR 468 - 4 (qps)	26 dB
	DIN EN 60651	14 dB - A
Signal-to-noise ratio (re 1 Pa at 1 kHz)	CCIR - weighted	68 dB
	A - weighted	80 dB
Max. SPL for THD 0,5%		139/135 dB
with 10 dB preattenuation		149/145 dB
Total dynamic range of the microphone amplifier		121 dB
Current consumtion ( P 48, DIN 45596, IEC 268 - 15 )		3 mA
Output connector		3-pin XLR connector goldplated contacts
Weight		540 g
Dimensions ( L x )		195 mm x 70 mm
Finish		satin nickel, dark bronze